Magnum 4300W, 48V Pure Sine Wave Inverter/Charger-The MS-PE 230V Series Inverter/Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. The MS-PE Series is powerful, easy-touse, and best of all, cost effective.Parallel stacking: You can parallel up to four inverter/chargers for up to 17.2kw of power at 230V. The Magnum Router is required for parallel stacking the MS-PE Series.Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.Safe and reliable: The MS-PE Series is listed to the stringent requirements CE for renewable energy installations.
Inverter Specifications:
- Input battery voltage range 18 – 34 VDC 36 – 64 VDC
- Nominal AC output voltage 230 VAC ±5% 230 VAC ±5%
- Output frequency and accuracy 50 Hz ± 0.4 Hz 50 Hz ± 0.4 Hz
- Total Harmonic Distortion (THD) < 5% < 5%
- 1 msec surge current (amps AC) 65 75
- 100 msec surge current (amps AC) 30 37
- 5 sec surge power (real watts) 6300 7500
- 30 sec surge power (real watts) 5300 7100
- 5 min surge power (real watts) 4750 6600
- 30 min surge power (real watts) 4600 5000
- Continuous power output at 25° C 4100 VA 4300 VA
- Maximum continuous input current 273 ADC 143 ADC
- Inverter efficiency (peak) 90% 91%
- Transfer time ~ 20 ms ~ 20 ms
- Search mode (typical) 9 watts 10 watts
- No load (230 VAC output, typical) 30 watts 28 watts
- Waveform Pure Sine Wave Pure Sine Wave
Charger Specifications:
- Continuous output at 25° C 105 ADC 55 ADC
- Charger efficiency (peak) 88% 91% Power factor > .95 > .95
- Input current at rated output (AC amps) 14 16
General Features and Capabilities:
- Transfer relay capability 30 amps AC
- Five stage charging capability Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
- Battery temperature compensation Yes, 4.6 m (15’) Battery Temp Sensor standard
- Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
- Overcurrent protection Yes, with two overlapping circuits
- Overtemperature protection Yes on transformer, MOSFETS, and battery
- Conformal coating on PCB’s for corrosion protection Yes
- Powder coated chassis & top for corrosion protection Yes
- Stainless steel fasteners for corrosion protection Yes
- Listings CE
- Warranty Two years
Environmental Specifications:
- Operating temperature -20° C to +60° C (-4° F to 140° F)
- Nonoperating temperature -40° C to +70° C (-40° F to 158° F)
- Operating humidity 0 to 95% RH non condensing
Physical Specifications:
- Dimensions (l x w x h) 34.9 cm x 32.1 cm x 20.3 cm (13.75” x 12.65” x 8.0”)38.1 cm x 16.5 cm x 12.7 cm (15.0” x 6.5” x 5.0”)
- Mounting Shelf (top or bottom up) or wall Shelf (top or bottom up) or wall
- Weight 25.0 kg (55 lb) 25.0 kg (55 lb)
- Shipping weight 28.6 kg (63 lb) 28.6 kg (63 lb)
- Max operating altitude 4570 m (15,000’) 4570 m (15,000’)
