Schneider Electric Conext Automatic Generator Start – The ConextTM Automatic Generator Start (AGS) automatically activates or stops a generator in response to changing power requirements. An excellent addition to an off-grid or backup power system, the AGS seamlessly connects to the XanbusTM network and shares status information with all other devices on the network. It monitors a set of system user-programmable parameters, such as battery voltage, state of charge, or grid power, and activates the generator in response to any changes. The AGS can also be configured remotely using the Conext System Control Panel (SCP) or Conext ComBox to engage a generator and can assist an inverter/ charger when output power demands are high.
Electrical Specifications:
- Nominal input network voltage 15 Vdc
- Max. operating current 200 mA @ nominal input network voltage
- Relay contact voltage rating 12 Vdc, 30 Vdc max1
- Max. relay contact current 5 A DC1
- Nominal 12/24 V thermostat input voltage 12 Vdc/24 Vdc1 = On
- Min. 12/24 V thermostat input voltage 9.5 Vdc1
- Max. 12/24 V thermostat input voltage 30 Vdc1
- Typical 12/24 V thermostat input current 14.6 mA @ 12 V
- Nominal 12/24 V generator running B+ voltage 12 Vdc/24 Vdc1 = On
- Min. 12/24 V generator running B+ voltage 9.5 Vdc1
- Max. 12/24 V generator running B+ voltage 30 Vdc1
- Typical 12/24 V generator running B+ voltage 14.6 mA @ 12 V
General Specifications:
- Dimensions (H x W x D) 9.55 x 14.6 x 3.7 cm (3.8 x 5.7 x 1.5 in)
- Weight 225.0 g (0.5 lb)
- Mounting options Wall-mount
- IP rating/location IP20, indoor only
- Warranty 2 to 5 years (depending on country)
- Part number 865-1060-01
Communication:
- Network protocol Xanbus
- Connectors 2 x RJ45 ports
